OLD SURVEY MEASUREMENTS. Old surveys were often measured using a Surveyors Chain. These were literally chains made up of 100 links. Each Chain was 66 feet long. Each link was 0.666 of a foot...or 7.92" To convert the distances on a plat measured in chains (abbreviate Ch) simply multiply the distance in chains by 66. Another common unit of measurement was the Pole. The Pole is exactly what it sounds like; a wood pole which was 16.5' feet long. To convert the distances on a plat measured in poles (abbreviated P) you must multiply the distance by 16.5 A Pole is sometimes called a "perch"on old surveys. MILES A mile is defined as being 5,280 feet in length. |
AREA MEASUREMENTS The standard unit of measuring land in the United States is the ACRE. An Acre is equal to 43,560 square feet (Sq. Ft.) of area. An acre is also equal to 10 square chains ( 66 x 66 x 10 = 43560 Sq. Ft.) or 160 square rods (16.5 x 16.5 x 160 = 43,560 Sq. Ft.) There are exactly 640 Acres in one square mile. Seeing how older units of measurement like the chain and the pole can be converted into acres it is easy to see that seemingly odd distances (66' and 16.5') really did make sense. WHAT DOES AN ACRE LOOK LIKE? If you had a parcel of land that was exactly 1 acre in size and was perfectly square it would be 208.71' on each of the 4 sides. If the same lot were a rectangle 100' wide it would be 435.60' feet deep (long). |
Manual of Instructions for the Survey of the Public Lands of the United States; 1973Prepared by the Bureau of Land Management, Technical Bulletin 6; pub. U.S. Dept of Interior | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Methods of Survey The methods described in this chapter comprise the specifications for determining the length and direction of lines. DISTANCE MEASUREMENT Units 2-1. The law prescribes the chain as the unit of linear measure for the survey of the public lands. All returns of measurements in the rectangular system are made in the true horizontal distance in miles, chains, and links. (Exceptions are special requirements for measurement in feet in townsite surveys, chapter VII, and mineral surveys, chapter X.)
Land grants by the French crown were made in arpents. The arpent is a unit of area, but the side of a square arpent came to be used for linear description. The Spanish crown and the Mexican Government granted lands which were usually described in linear varas. Both the arpent and the vara have slightly different values in different States. The conversions most often needed are shown in the Standard Field Tables.
|
No comments:
Post a Comment